@article {Ouahabi201658,
	title = {Dual-band band stop filter based on complementary split ring resonator},
	journal = {International Journal of Microwave and Optical Technology},
	volume = {11},
	number = {1},
	year = {2016},
	note = {cited By 0},
	pages = {58-63},
	abstract = {This paper describes the design of dual-band band stop filter (DBBSF). This architecture use complementary split ring resonator to tune the band stop frequencies and the filter characteristics are improved using three open stubs. The CSRR is used to reject two frequency responses at 2.45GHz and 5.8GHz, operating in the Industrial Scientific Medical (ISM), and the open stubs are employed to improve the return loss between the two frequency responses. To validate the design concept, a prototype of DBBSF was fabricated and evaluated. The measured frequency responses agree well with the simulation results, validating our proposed design. {\textcopyright} 2016 IAMOT.},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84957795026\&partnerID=40\&md5=812924442f8aa6943b13515c0beae228},
	author = {Ouahabi, M.E.a and Zakriti, A.b and Essaaidi, M.c and Touhami, N.A.a}
}
@conference {Haddad2016237,
	title = {Rectangular Dielectric Resonator Antenna (RDRA) for anti-collision short range radar (SRR) application},
	booktitle = {Proceedings of 2016 International Conference on Electrical and Information Technologies, ICEIT 2016},
	year = {2016},
	note = {cited By 0},
	pages = {237-239},
	abstract = {This paper presents the design of Rectangular Dielectric Resonator Antenna (RDRA) feed by a micro-strip line for anti-collision radar SRR application at 24 GHz. The proposed RDRA operates at a frequency of 24 GHz with a high dielectric constant of 41. The simulated RDRA has a high radiation efficiency (88.4 \%). The return loss, radiation pattern and gain of the proposed antenna are evaluated. The simulation process was carried out using Computer Simulation Technology (CST) Microwave Studio. {\textcopyright} 2016 IEEE.},
	doi = {10.1109/EITech.2016.7519597},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84992188168\&doi=10.1109\%2fEITech.2016.7519597\&partnerID=40\&md5=459bdb70786bf969bb54ead0761fd18e},
	author = {Haddad, A.a and Aoutoul, M.b and Rais, K.a and Essaaidi, M.c}
}
@article {Naghar20151813,
	title = {Design of compact multiband bandpass filter with suppression of second harmonic spurious by coupling gap reduction},
	journal = {Journal of Electromagnetic Waves and Applications},
	volume = {29},
	number = {14},
	year = {2015},
	note = {cited By 1},
	pages = {1813-1828},
	abstract = {In this paper, we describe a method to implement compact multiband bandpass filters with suppression of second harmonic frequency. This filter design approach is based on decreasing the coupling gap between adjacent resonators of a parallel-coupled-line bandpass filter in order to achieve both the desired multiband frequency response and the spurious suppression. We present the theoretical analysis of the proposed structure that consists of modeling the frequency dependence of the even- and odd-mode characteristic impedances as well as due to the different phase velocities of the parallel-coupled microstrip lines. As an example, a compact tri-band parallel-coupled-line bandpass filter with suppression of second harmonic frequency was implemented operating at 1.9/3.2/4.6 GHz to cover PCS1900, WiMAX, and C-band applications. A three-pole Chebyshev parallel-coupled microstrip bandpass filter was designed at a center frequency of 3.2 GHz and used as the basis to validate the gapping effect on the filter response which also achieves a narrower bandwidth for the second harmonic. Finally, the filter performance with minimized coupling gap is compared to a filter enhanced by the insertion of apertures in the ground plane. Generally speaking, good agreement was accomplished between simulated, calculated, and measured results. {\textcopyright} 2015 Taylor \& Francis.},
	doi = {10.1080/09205071.2015.1043029},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84940714115\&doi=10.1080\%2f09205071.2015.1043029\&partnerID=40\&md5=b402327d69e8f5f98418025a5c5cd607},
	author = {Naghar, A.a and Aghzout, O.a and Alejos, A.V.b and Sanchez, M.G.b and Essaaidi, M.c}
}
@conference {Naghar20142018,
	title = {Development of a calculator for Edge and Parallel Coupled Microstrip band pass filters},
	booktitle = {IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)},
	year = {2014},
	note = {cited By 3},
	pages = {2018-2019},
	abstract = {This paper presents an implemented calculator tool for the design of Edge/ Parallel Coupled Microstrip Band Pass Filters (PCMBPF) that makes use of the MATLAB software. This calculator allows estimating both the parameters required for the design of the PCMBPF and the electrical response which is obtained by means of the equivalent circuit of this type of filters. Based on the transmission line theory approach (TLTA), the calculator herein proposed is a good solution to simply obtain the design parameters of this type of filters given that all formulas required for the PCMBPF design are programmed using close-form mathematic expressions and the coupling matrix concept. In order to validate our calculator performance, we implemented the proposed filter in a commercial electromagnetic simulator CST MWs that considers a set of electromagnetic effects, and accurately determine the final filter design. Secondly, we compared these simulation outcomes with the measurement results, achieving a reasonable agreement. {\textcopyright} 2014 IEEE.},
	doi = {10.1109/APS.2014.6905336},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84907870530\&doi=10.1109\%2fAPS.2014.6905336\&partnerID=40\&md5=bc3cd87613500ca710b9f58fdca9f27d},
	author = {Naghar, A.a and Aghzout, O.a and Vazquez Alejos, A.b and Garcia Sanchez, M.b and Essaaidi, M.c}
}
@article {Zakriti201387,
	title = {Design and realization of three-pole bandpass filter with spurious response suppression using defected ground structures},
	journal = {Progress In Electromagnetics Research C},
	volume = {45},
	year = {2013},
	note = {cited By 0},
	pages = {87-100},
	abstract = {In this paper, a three-pole bandpass filter (BPF) using a new defected ground structure (DGS) is discussed. The proposed DGS is incorporated in the ground plane under the feed lines and the coupled lines of a bandpass filter to improve the performance of the filter in both passband and stopband. The banpass filter is designed with a center frequency of 1.8 GHz and a bandwidth of 270 MHz. The suppression of better than 20 dB was achieved for frequencies between 2.2 and 5 GHz. A prototype of BPF was fabricated and tested. Prototype measured data was in good agreement with simulation results.},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84887400153\&partnerID=40\&md5=ff9bafb969c5b00869e951183ae50f47},
	author = {Zakriti, A.a and Touhami, N.A.b and Bargach, K.b and Lamsalli, M.a and Essaaidi, M.c}
}
@article {Attaoui201383,
	title = {Multiple equivalent simultaneous offers strategy in an agent-based grid resource brokering system-initial considerations},
	journal = {Scalable Computing},
	volume = {14},
	number = {2},
	year = {2013},
	note = {cited By 0},
	pages = {83-94},
	abstract = {The Agent in Grid (AiG) project attempts to integrate the concept of the Grid and anagent-based system to facilitate efficient resource management in the Grid. In this paper, we present preliminary considerations concerning multiple equivalent simultaneous offers strategy that can be used in the Service Level Agreement (SLA) negotiations. These negotiations are the key part of the main use case scenarios within the AiG project. In this context, first, we describe the AiG system. Second, we introduce the simultaneous offer strategy, as a mechanism known from economy, and suggest an approach for using it in the AiG negotiations. {\textcopyright} 2013 SCPE.},
	doi = {10.12694/scpe.v14i2.842},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84884175155\&doi=10.12694\%2fscpe.v14i2.842\&partnerID=40\&md5=de46ef42a2dff1ff1937b31977015b55},
	author = {Attaoui, N.a and Ganzha, M.b and Paprzycki, M.b and Wasielewska, K.b and Essaaidi, M.c}
}
