@conference { ISI:000380387700030,
	title = {Maximization of Generated Power from Wind Energy Conversion Systems using a Doubly Fed Induction Generator with Active Disturbance Rejection Control},
	booktitle = {2014 SECOND WORLD CONFERENCE ON COMPLEX SYSTEMS (WCCS)},
	year = {2014},
	note = {2014 Second World Conference on Complex Systems (WCCS), Agadir, MOROCCO, NOV 10-12, 2014},
	pages = {330-335},
	publisher = {Ibn Zohr Univ; Moroccan Soc of Complex Syst; IEEE Morocco; Int Acad for Syst and Cybernet Sci IASCYS},
	organization = {Ibn Zohr Univ; Moroccan Soc of Complex Syst; IEEE Morocco; Int Acad for Syst and Cybernet Sci IASCYS},
	abstract = {This paper presents the control of doubly fed induction generator (DFIG) used in the wind energy conversion systems. Maximum power point tracking (MPPT) strategy is used to extract the maximum of power during the conversion and taking care that the system does not exceed the operating limits. This is done by acting on the pitch angle to control the orientation of the turbine{\textquoteright}s blades. Having regard to its robustness and performance, active disturbance rejection control (ADRC) based on the extended state observer (ESO) is employed to achieve the control of both rotor and grid side converters. Simulations are carried out using Matlab Simulink.},
	isbn = {978-1-4799-4647-1},
	author = {Boukhriss, Ali and Essadki, Ahmed and Bouallouch, Abdellah and Nasser, Tamou}
}
@conference { ISI:000380387800129,
	title = {MPPT Commands for a photovoltaic generator using the Incremental Conductance Method and the fuzzy logic command},
	booktitle = {2014 INTERNATIONAL CONFERENCE ON ELECTRICAL SCIENCES AND TECHNOLOGIES IN MAGHREB (CISTEM)},
	year = {2014},
	note = {International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM 2014), Tunis, TUNISIA, DEC 03-06, 2014},
	abstract = {In the era of sustainable development, photovoltaic (PV) technology has shown significant potential as a renewable energy source. Photovoltaic generators (GPV) have a non-linear current-voltage characteristic, with a maximum power point (MPP) characterized by an optimal voltage, and depends on environmental factors such as temperature and irradiation. To extract each time the maximum power available at the terminals of the GPV and transfer it to the load, an adaptation stage is used, consisting of a Boost chopper controlled by a maximum power point tracking technique (MPPT) through a stage of pulse width modulation (PWM). Our choice has focused on two techniques which are: the Incremental Conductance Method (InCond) and that of control using the fuzzy logic. The implementation and simulation of the system (photovoltaic generator, chopper Boost, PWM and MPPT techniques) are then performed in the Matlab/Simulink environment.},
	isbn = {978-1-4799-7300-2},
	author = {Elgharbaoui, Elmahdi and Essadki, Ahmed and Nasser, Tamou}
}
